[1] The work area varies according to the machine functions used. Please check the Specs page for more information.
[2] The UI is subject to change due to iterations.
[3] The test result was obtained by printing a 100 mm × 100 mm × 100 mm cube with PLA filament, and using 0.4 mm nozzle. Dimensional accuracy may vary depending on the testing conditions and product iteration, and is for reference only.
[4] In addition to quick-swap hot end with 0.4 mm brass nozzle, you can also buy 0.2 mm, 0.6 mm, 0.8 mm brass nozzles, as well as hot end with 0.4 mm hardened steel nozzle.
[5] The data is obtained based on the 8 mm paulownia wood. Depending on your material, the cutting depth might vary.
[6] The data are obtained based on the 1.5 mm basswoods, which may vary depending on the testing conditions and product iteration, and is for reference only.
[7] This feature applies to flat and regularly shaped materials. Materials that are transparent, highly reflective or of red and black color might not be applicable.
[8] This data is obtained by cutting beech with a 3.175 mm double flute flat end mill, which may vary depending on the testing conditions and product iteration, and is for reference only.
[9] Please check the FAQ article for more information on modules and addons compatibility.