THE 3-IN-1 3D PRINTER

Enclosure Air Purifier

Enclosure Air Purifier

Snapmaker 2.0 Enclosure

It offers you an extra layer of safety during the making process, and fits seamlessly into your Snapmaker 2.0 system.

LaserReduction

PhysicalSafeguards

DustIsolation

ExhaustSystem

Tri-foldMagnetic Doors

DoorDetection

Laser Reduction

The enclosure panels are specially designed to reduce the impact of laser from Snapmaker 2.0 Laser

Engraving Module, from class four to the lowest level of class one ^[1].

Dust Isolation

Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust.

Tri-fold Magnetic Doors

Pre-assembled doors can be triple-folded ^[2],

taking up only a very limited space, while providing sufficient childproofing.

Door Detection

Laser or CNC job pauses automatically when either door is opened ^[3], giving you extra protection.

And don't worry about your creation – you can resume it with just a few taps.

Keep the Temperature Just Right

Warmth is maintained when you 3D print with high-performance filaments like ABS,

so that the print is less likely to warp due to temperature variation.

Built-in LED Strips

Create as you like, whether it’s day or night.

Custom Software Support

Control the LED strips and exhaust fan using the

Touchscreen or Snapmaker Luban that you're familiar with.

All-purpose Beams for Your Imagination

The enclosure frame is constructed with universal 24 mm and 48 mm Aluminum beams, where you can add official, or even DIY addons to your machine.

A New Level of Air Safety

Chemicals such as PM (Particle Matters) and VOCs (Volatile Organic Compounds) can be released when you 3D print with or laser engrave on certain types of materials. You can further filter them with a Snapmaker 2.0 Air Purifier.

Exclusive FilterCartridge

FilterDetection

Filter LifeDetection

Fan SpeedControl

Status Light

Full-metalDesign

All in one, Snapmaker Air Purifier can be a pretty efficient emissions eliminator[6]

40W

20W

10W

1.6W

Snapmaker 40W Laser Module Test Data

Snapmaker 20W Laser Module Test Data

Snapmaker 10W Laser Module Test Data

Snapmaker 1.6W Laser Module Test Data

Long Live the Filter Cartridge

Efficiency is not all that matters. The different levels of filter are arranged in certain order inside the cartridge to maximize its lifespan, so that you won't need to replace the cartridge until it gets fully used.

Filter Life Detection

Snapmaker 2.0 carries out a real-time monitoring on the Filter Cartridge and shows its lifespan on the Touchscreen. It lets you know when it's time to pop in a new one.

Unpowered>

Working normally>

Connecting to the Controller>

Filter Cartridge taken out>

Low filter life or blocked inlet/outlet>

Danger>

Be in the Know

The built-in LED strip shows you how the Air Purifier is working

through its color change, flowing, breathing, and flashing.

Fan Speed Control

Tap on the Touchscreen to set fan speed for different types of job^[7].

Full-metal Design

Both the Enclosure and the Air Purifier are neatly designed as ever. The CNC-machined aluminum beams and shell, with their surface anodized, deliver great durability, super-fine texture, a consistent silver gray looking, as well as well-sealed machine bodies. They're powerful, yet adorable.

Creativeness Knows No Bounds

Along with the CAN Hub, you can use the Enclosure and the Air Purifier together with all the existing and upcoming Snapmaker 2.0 addons.

Shop now at Snapmaker Online Store.

Enclosure

from399 USD

Air Purifier

499 USD

Filter Cartridge (2 pcs)

199 USD

CAN Hub

59 USD

[1] Tested by Bay Area Compliance Laboratories Corp. (Shenzhen), according to standard IEC/EN 60825-1:2014. Report No.: RSZ200416002-SF-09.

[2] The A150 Enclosure's doors are magnetic, but can't be folded.

[3] Door Detection applies only to laser and CNC functions, excluding 3D printing.

[4] The Air Purifier must be used together with the Enclosure for Snapmaker 2.0.

[5] Using the Air Purifier when printing with ABS or other thermo-sensitive filaments may lead to poor printing quality. If you need to filter 3D printing emissions, it's recommended to turn on the Air Purifier after printing job is finished.

[6] The data is sourced from the Snapmaker Testing Laboratory. Experimental Conditions: With the enclosure and the enclosure fan in use, the 1.6W, 10W, 20W, and 40W laser modules were employed to continuously cut 2mm, 3mm, 5mm, and 5mm basswood sheets for 5 minutes respectively, to measure the PM and TVOC content at the outlet of the exhaust duct. Due to variations in usage conditions and environments, the specific performance and results in actual use may differ from the provided data. Snapmaker shall not be held responsible for any discrepancies or consequences resulting from such environmental changes.

[7] The Touchscreen UI is subject to change due to iterations.

