先进激光和光技术，玩出新高度。

10W 激光模组配备最先进的激光分光镜，功率从 5W 跃升至 10W，能够加工更多种类的材料并，丰富你的作品库。

椴木
椴木
皮革
皮革
砖
砖
板岩
板岩
不锈钢
不锈钢
阳极氧化铝
阳极氧化铝
深色玻璃
深色玻璃
亚克力
亚克力
https://ditfjx9w4x3vl.cloudfront.net/assets/laser/materials/clice.png
https://ditfjx9w4x3vl.cloudfront.net/assets/laser/materials/flagon.png
https://ditfjx9w4x3vl.cloudfront.net/assets/laser/materials/clock.png
https://ditfjx9w4x3vl.cloudfront.net/assets/laser/materials/poker.png
https://ditfjx9w4x3vl.cloudfront.net/assets/laser/materials/wolf.png
https://ditfjx9w4x3vl.cloudfront.net/assets/laser/materials/earphone sleeve.png

1.6W 和10W 激光对比

同时，10W 激光模组的工作速度可高达 6000 mm/min，可切割厚度达 8mm 的椴木[2]。也就是说，10W 激光模组的切割速度达到 1.6W 模组的 8 倍[3]. 一杯茶时间，完成激光加工。

雕刻速度（1.5mm 椴木）
6000mm/min
1000mm/min
切割速度（1.5mm 椴木）
600mm/min
140mm/min ( Two Passes )
最大切割深度（椴木）
8.0mm
1.5mm

Step up Your Game with the Cutting-edge Laser Beam Splitters.

The 10W Laser Module is equipped with the most cutting-edge laser beam splitters, effecting a power leap from 5 W to 10 W. This means you can now play with a wider variety of materials and hammer out more projects.
Meanwhile, the work speed of the 10W Laser Module can be as high as 6000 mm/min, while cutting through basswoods as thick as 8 mm [2]. To put that into perspective, the cutting speed is up to 8 times that of the 1.6W Laser Module [3]. It can literally fulfill a laser job in a blink of an eye.

1.6W and 10W Laser Comparison

Here is a comparison between 1.6W and 10W laser, taking 1.5 mm-thick basswood engraving and cutting as an example.
Engraving Speed
6000 mm/min
10W
1000 mm/min
1.6W
Cutting Speed
600 mm/min
10W
140 mm/min
1.6W( Two Passes )
Cutting Depth
8.0 mm
10W
1.5 mm
1.6W
Not Just About Strength, but Finesse.
With the Fast-axis Collimating (FAC) lenses embedded in the two laser diodes, the module first compresses the laser spot of each laser diodes. Then it combines the laser beams of the two laser diodes using the beam combining technology, resulting in a higher output power and an ultra-fine laser focus (0.05 mm × 0.2 mm), which allows for higher energy density. Smaller laser focus and higher power deliver high-quality laser works with impeccable details.
Get Cracking While We Take Care of the Rest.
The unique wind channel inside the 10W Laser Module provides excellent wind pressure, blowing the fumes away as the laser beam cuts into the material, sending the fumes directly into the grids of the Laser Engraving and Cutting Platform, which then get channeled out, reducing their interference on laser machining.
Auto Focus in Seconds.
No more manual material measuring. Place your material on the platform, and the module will calculate it for you. Thanks to the triangulation technique, the module is able to measure the thickness of your material by obtaining a few sets of data on the camera and light emitter. It will then adjust itself in Z orientation so that the focal point falls right on the material surface [4]. You can finish focusing in a few seconds.
Camera Capture Taken to a Whole New Level.
With the upgraded camera capture process, the wide-angle HD camera captures in one take your material and lets you get an instant preview in Luban of your laser job on the material. Checking the work area is now completely hassle-free.
Tailor-made Software Snapmaker Luban, Making a Pro out of Every Beginner.
Ready-to-use Material Profiles, Why Start from 0 When You Can Start from 1?
We not only care about user experience, we also value user success. That's why we embarked on extensive material testing and built you a case library in Luban. It lets you access full sets of recommended parameters for common laser materials, so you can choose one and start right off.
3D to 2D Conversion, Rock It with Laser like Having Fun with 3DP.
The fun of cutting and assembling never gets old. This new feature of Luban lets you convert 3D models into cuttable vector images. Things that can only be brought to life by 3D printing can now be laser machined as well.
High Customizability, Make It as You like It.
Luban supports editing images in numerous formats, tinkering with shades and tones, and transforming images in ways you like. More features are to be added.
Orientation Detection, Be Safe While Being Adventurous.
To protect the user and any bystanders, we included a gyro sensor in the module, which makes sure that no laser beam comes out if the module is incorrectly installed or deviates from its designated position.
A Module of Two Blowing Systems.
Prolonged exposure to high temperature will reduce the lifespan of the laser diode. The 10W Laser Module has two separate blowing systems for its PCBA and its laser diode to make sure the diode is properly cooled off whenever you use it. Under proper use, the lifespan can be as long as 8,000–10,000 hours [5].
Overheat Protection, Better Safe than Sorry.
The module stops working automatically whenever its temperature sensor detects a higher than normal (one that exceeds 55℃/131℉) working temperature. Once the temperature falls back into the normal range, you can resume your job on the Touchscreen.
Expandability, as Always.
The 10W Laser Module is compatible with all models of the Snapmaker 2.0 series apart from the 150 models, and will be compatible with upcoming machines. You can use it with the addons as well, including the Rotary Module, Emergency Stop Button, Air Purifier, and CAN Hub.
Buy Now
Buy Now

[1] This is a class 4 laser product. You should always operate the 10W Laser Module with the Snapmaker 2.0 Enclosure covered and wear laser safety goggles. Snapmaker shall not be held responsible for any consequences caused by improper use of this product.

[2] Note that you need to perform two cutting passes in order to cut through an 8 mm basswood. The maximum cutting depth per pass for basswood is 5 mm.

[3] The data are obtained based on the 1.5 mm basswoods. Depending on your material, the cutting speed and depth might vary.

[4] This feature applies to flat and regularly shaped materials. Materials that are transparent, highly reflective or of red and black color might not be applicable.

[5] This data is obtained under the condition of typical laser use, and is for reference only. Depending on how each individual users use this product, the data will differ.

订阅我们的邮件
了解有关 3D 打印、激光雕刻、CNC 雕刻和最新优惠的消息。
产品
支持
活动
探索
公司
合作伙伴
联系我们
售前和物流：info@snapmaker.com
技术支持：support@snapmaker.com
分销：info@snapmaker.com
商业合作：marketing@snapmaker.com
电话：+86(0)755 26926117
办公时间：周一至周五，9:30-18:30（GMT+8:00）
© 2024 Snapmaker。版权所有。 | 粤ICP备19101334号