.jpg)
Product Support
Know more about Snapmaker printers, modules, and addons.
Get Started
Know more about Snapmaker Luban and more.
Snapmaker Academy
Take a deep dive into the world of making.
Loading comments...
Store
Diode Laser
Max. Work Speed
Work Area
Industrial-grade Linear Rails
Smart Air Assist
Laser Vectors in Luban
Laser Class 1 Safety
@Alan Fox
@James Paul Hildebrandt
@David Gadea
@Michael Mikkelson
@Brendon Powell
@Alan Fox
@JRV_3D
@Chris Coldbreath
@Steven Theiss
@Chris Coldbreath
@Steven Theiss
@Linh Tran
@Steven Theiss
@Linh Tran
@Steven Theiss
@Steven Theiss
@Alan Fox
@James Paul Hildebrandt
@David Gadea
@Michael Mikkelson
@Brendon Powell
@Alan Fox
@JRV_3D
@Chris Coldbreath
@Steven Theiss
@Chris Coldbreath
@Steven Theiss
@Linh Tran
@Steven Theiss
@Linh Tran
@Steven Theiss
@Steven Theiss
Transform even more ideas into reality.
Cut with 40W laser power, cut with ease.
Cutting-edge laser beam combining technology.
40W Laser Module delivers superb performance with the most cutting-edge laser beam splitter and beam shaping optics. The embedded beam shapers compress the laser spot of each laser diodes. Then the splitter combines the laser beams of the eight laser diodes using the beam combining technology, resulting in a higher energy density and output power.
![20mm/s Max. Cutting Speed[2]](https://ditfjx9w4x3vl.cloudfront.net/assets/ray/ray-20mm-per-sec.svg)
20W and 40W Laser in comparison.
Material: Basswood Plywood
Thickness: 15mm (one pass)
Speed: 3mm/s
Power: 100%
Initial Cutting Height Offset: 3mm
Material: Basswood Plywood
Thickness: 10mm (one pass)
Speed: 3mm/s
Power: 100%
Initial Cutting Height Offset: 3mm
Smart Air Assist.
Achieve cleaner cuts with Air Assist.
-and-Air-Assist-(OFF).jpg)
A Comparison between Air Assist (ON) and Air Assist (OFF)
Control Air Assist via Luban.
When doing both engraving and cutting in one piece of work, it is not recommended to apply Air Assist on all layers. Therefore, Luban can let you enable Air Assist only on cutting layers, saving you the bother of manually turning it on or off for different layers.
Snapmaker's signature industrial-grade linear rails.
We adopt industrial-grade linear rails in Artisan 3-in-1 3D Printer to ensure minimal wobble even in fast CNC machining. The very same industrial-grade linear rails are used in XY-axis of Ray to support high speed movement and long-lasting operation. Running a 40W Laser Module is easy with Ray.
Max. Work Speed
400mm × 600mm.
Ideal for big ideas.
28.39"
Flexible Z-height adjustment.
Cylindrical foot can be attached to not only the machine but also the laser bed, enabling you to work with a laser job as thick as 160mm. Even thick objects like a guitar can be easily placed within for engraving.
Laser Class 1 safety.
Laser Reduction
The Enclosure panels made with brown acrylic are specially designed to shield you from the laser hazards and provide a safe environment for your family and pets.
Door Detection
The Enclosure's door-detection sensor lets Ray automatically stop the laser job when the door is opened.
Laser Safety Shield
The Laser Safety Shield can partly reduce laser radiation. Together with the use of the Enclosure for Ray, laser hazards can be further reduced[2].
Overheat Protection
The module stops working automatically whenever its temperature sensor detects a higher than normal (one that exceeds 55℃/131℉) working temperature. Once the temperature falls back into the normal range, you can resume your job on the Power Module.
Orientation Detection
We include a gyro sensor in the module, which makes sure that no laser beam comes out if the module is incorrectly installed or deviates from its designated position.
Dust Isolation
Cover with the Enclosure and turn on the exhaust fan to cast off all the smoke and dust. You can further connect it with our Air Purifier to filter harmful chemicals.
1000+ ready-to-use laser vectors, right in Luban.
Design your laser work in seconds with templates.
High customizability and high efficiency, you can have both. Luban provides an extensive library of preset templates, including common patterns, shapes, and icons, for you to quickly come up with a design. What's more, with open source art fonts you can always add a personalized touch to your work.
An extensive library of common patterns, shapes, and icons.
Compatible with LightBurn.
Ray is compatible with LightBurn, one of the top laser softwares, supporting features like serial connection, movement control, and G-code generation. You can also access full sets of recommended parameters for common laser materials in LightBurn and Luban.
Laser focusing made easy with quick swap.
Release the Focus Lever, loosen the toolhead with quick swap feature, move the toolhead down until the Focus Lever touches the material. In just three steps, you can easily finish the calibration.
Our modular design opens up more possibilities.
Infrared 2W Laser Module
With a wavelength of 1064nm, the upcoming Infrared 2W Laser Module is ideal for engraving plastic and all kinds of metal.
Rotary Module (Harmonic Drive Version)
The Rotary Module uses strain wave gearing and packs a 100:1 speed reducer that converts the power to a lower output speed. This allows the 3-jaw chuck to rotate with a minimum angle of 0.1°. You can realize ultra-fine machining without missing any details.
6+ years experience of delivering premium laser products.
Four options, from budget choice to professional pick.
 × 8.jpg)
Snapmaker Ray 40W Laser Cutter with Enclosure
40W $1,699
Buy Now
Notes:
[1] Depending on your material, the cutting speed might vary.
[2] This is a class 4 laser product. You should always operate the 20W & 40W Laser Module with the Enclosure covered and wear laser safety goggles. Snapmaker shall not be held responsible for any consequences caused by improper use of this product.
[3] Free shipping in EU, CA, UK, and US (except AK, HI, and PR).
CONTACT US
Pre-sales and Logistics: info@snapmaker.com
Technical Support: support@snapmaker.com
Reselling: info@snapmaker.com
Business Cooperation: marketing@snapmaker.com
Tel: +86(0)755 26926117
Office Hours: Monday to Friday, 9:30-18:30 (GMT+8:00)
© 2024 Snapmaker. All Rights Reserved.